产品展示
     注塑机配件
     CNC数控加工
     机加工
     金属表面处理
      热处理
      电镀
      抛光
      工艺流程介绍
您的当前位置:首页 > 热处理

1、井式炉Pit Furnace
    井式炉常用于长大工件和车轮、轮箍等的热处理, 是周期式作业炉,适用于杆类,长轴类零件的热处理。炉身是圆筒形的深井,工件由专用吊车垂直装入炉内加热。安置在车间地平面以下。
    Pit furnace is a type with cycle operation, usually supplying heat treatment for the long and big workpiece, the vehicle wheel, the wheel tire and so on, especially for rods and long axis parts. Inside the body it's cylindrical and deep, and the workpiece is loaded vertically into the furnace for heating with a special crane.
Our pit furnace is fixed below the ground.
    用途Application
    1、提高炉内温度均匀度;Enhance the temperature equitability of the furnace inside
2、多区控制,进一步提高炉温均匀性;Multi-section control to increase the homogeneity of the temperature inside
    3、炉膛内带不锈钢导风桶;The body inside has stainless ventilation system.
4、炉盖与炉体采用耐高温纤维棉制作,炉体保温性能好,节约能源,降低生产成本;The cover and the body adopt fiber cotton resistant to elevated temperatures to save resource and reduce the production cost.
    5、无污染,环保效益好。No pollution and friendly environmental.
--------------------------------------------------------------------------
    与井式炉配套时,还应建有同样深的淬火冷却水槽和油槽。
    To form a complete set, there should be Quenching Tank and Oil-quenching Tank to mate with the Pit Furnace.
    冷却池Quenching Tank
    供炉料淬火冷却用的盛装淬冷液的槽形容器。
    It is a tank containing quenching liquid to cold the quenching material inside the furnace body.
    油淬池/淬火油槽Oil-quenching Tank
    提供各种机械零件、工件在工艺要求恒定温度的淬火油中进行淬火。
    Quenching different materials such as mechanical components and workpieces in the quenching oil with steady temperature.

2、箱式炉Sealed Box type Quenching Furnace
    具有箱形加热室、前室和淬火油槽,炉料在炉内完成淬火工艺的热处理炉。
    可以渗碳、软氮化、调质等多用途作业,既可以大批量生产,又可中批量生产,生产能力比井式炉高。
    It contains the sealed box-type heat chamber, the pre-chamber and the oil-quenching tank. It's a furnace for heat treatment to finish quenching step inside the body.
    Sealed Box type Quenching Furnace is for multi-purpose work such as carburization, tufftriding, quenching and tempering,whose production capability can be in big and middle quantity, much higher than the pit furnace.

3、校直机Leveller
    校直机是对汽车及其他机械行业广泛应用的各种轴类零件在热处理过程中产生变形,而进行校直的设备。
    A Leveller is equipment to re-correct all kinds of axis parts which are deformed during the heat treatment in the areas of vehicles and other mechanical lines.

 
扬州市统扬机械有限公司 版权所有 地址:江苏省扬州市祥园路111号 邮箱:yztym2008@163.com 工信部备案:苏ICP备12078984号
电话: 86-0514-85558929 移动电话: 13951054888 传真: 86-0514-85558929